Li-Polymer Custom Battery Packs & Akku

What is Li-Po Battery Packs?

A Lithium-Polymer battery ( sometimes LiPo battery or LIP ) are rechargeable (secondary cell) batteries. LiPo batteries are usually composed of several identical secondary cells in parallel to increase the discharge current capability, and are often available in series "packs" to increase the total available voltage. This type has technologically evolved from lithium-ion batteries.

General Usage :
LiPo batteries can be used both in devices that need recharging, such as Medical Devices, Handheld Scanners, Portable Electronics, Wireless Detector, Handheld Computer, Smart Cell Phone, Millitary Functions, RFID Devices, etc.

Li-Po Batteries Advantages :
Conclusion: High energy density; High operation voltage; No memory accumulation; Long cycle life; No pollution; Light weight; Very low self-discharge rate; Any size or shape!
a. High energy density - potential for application of higher capacities.
b. Does not need prolonged priming when new. One regular charge is all that's needed.
c. Relatively low self-discharge - self-discharge is less than half that of nickel-based batteries.
d. Low Maintenance - no periodic discharge is needed; there is no memory.
e. Cells can be made to almost any size or shape.
f. Specialty cells can provide very high current to applications such as power tools, medical devices batteries...
Li-Po secondary cells have the highest energy density of all rechargeable batteries and are widely used in medical emergency devices, laptop batteries, digital cameras, video cameras and other portable electronic devices. Soon, the Li-Po battery will replace Li-ion or NiMH cells in most rechargeable battery applications. PBS battery tries to offer the highest quality and lowest price LiPo batteries to all end users, engineers and hobbyists alike. Please try out our LiPo battery technology in your application.

Li-Po Battery Storage & Transportation :
1. Store battery at room temperature between 40 and 80 degrees F for best results.
2. Do not expose battery pack to direct sunlight (heat) for extended periods.
3. When transporting or temporarily storing in a vehicle, temperature range should be greater than 20 degrees F but no more than 150 degrees F.
4. Storing battery at temperatures greater than 170 degrees F for extended periods of time (more than 2 hours) may cause damage to battery and possible fire.

Battery Safe Attention :
1. Charge battery with good quality Lithium-Polymer charger. A poor quality charger can be dangerous.
2. Set voltage and current correctly (failure to do so can cause fire).
3. Pls check cell voltage after the first charge.
4. Do not discharge battery to a level below 3V per cell under load. Deep discharge below 3V per cell can deteriorate battery performance.
5. Use caution to avoid puncture of the cell. Puncture of cells may cause a fire.
6. Charging the battery every 2 months to keep it fresh if you don't use it.

Operating Charging Temperature :
32 to 113 degree F
Discharge: 32 to 140 degree F
1). Let battery cool down to an ambient temperature before charging.
2). During discharge and handling of batteries, do not exceed 160 degree F.

Li-Po Battery Life :
Batteries that lose 20% of their capacity must be removed from service and disposed of properly. Discharge the battery to 3V/Cell, making sure output wires are insulated, then wrap battery in a bag for disposal.

Battery Product Warranty :
Product warranty is limited to original defects in material and workmanship. Warranty does not cover collateral damage. Due Misuse, abuse, incorrect charging and other inappropriate use of this product are not covered under warranty.

Your RFQ will be reply within 24 hours normally. Sometimes have a little delay due to the weekends or holidays.

We work time from Monday to Friday (8:00-17:30 GTM+8)

If you don't receive PBS feedback after 48 hours, please check your E-mail spam

Contact PBS and we will be on service of you until you are satisfied with your purchase.